價格：免費
更新日期：2019-04-26
檔案大小：4.8M
目前版本：1.0.2
版本需求：Android 5.0 以上版本
官方網站：mailto:arnoldo2jr@gmail.com
Email：https://ece.uwaterloo.ca/~a36rodri/privacy_policy.html
聯絡地址：Waterloo, ON, Canada
★ Resistor Calculator Section
Two-way conversion
Calculate resistor values by selecting its band colors on the grid. You can also get the color bands of the desired resistor value by typing its value in ohms in the top-right corner.
Support 4 bands and 5 bands.
Tap on the resistor to switch between 4 and 5 bands.
★ Scanning Section
Resistor Types supported
Only 4-bands resistors with a clear background colour are supported.
Resistor Placement
· Make sure only 1 resistor is inside the square.
· Place the resistor HORIZONTALLY inside the blue square with the tolerance on the
RIGHT on a white background (a sheet of paper will do the job).
· Use the zoom bar to make the resistor as big as possible.
· The bigger the resistor is, the better the app will be able to determine the colour bands.
Auto-focus
The camera in the app is set to auto-adjust focus by itself. If the focus is bad, simply move the camera a bit farther away from the resistor and use the zoom bar to enlarge the resistor in the square.
Light Conditions
The camera won't do any better than our eyes to identify colors. Therefore light intensity and coloration are really important for color detection. If the camera flashlight is not being used make sure that:
· Light is white (any other colour won't work)
· There is enough light for the camera to "see" well the resistor
· There are no shadows
Accuracy of the app
Accuracy of the app could vary a great deal depending on:
· Camera resolution
· Lightning conditions
· Background colour (Should be white only)
· Positioning
· Focus
· White balance
I take care of most of those variables but positioning, lighting conditions and resolution will be different from user to user.
Use "Live" mode for better results and with the FLASHLIGHT ON.
Always try to follow these tips as thoroughly as possible for the best results.
The app can identify well most of the colours. However, for colours such as WHITE or GRAY the app doesn't do so well. This is something I'm aware of and I plan to improve it in later updates. (and remove "beta" from the name)
Email me at arnoldo2jr@gmail.com for any suggestions, Hope you like it!
icons from: https://www.flaticon.com/
